Be scientific in writing

J. Ambreen, T. P. Malick, J. F. Tan, H. S. Zulfikree, R. Gopal, Y. K Hak, S. Sivalingam and S. Saidin, “Comparative evaluation of biodegradable and biofunctional electrospun polyurethane-based membranes with commercial expanded polytetrafluoroethylene and polyethylene terephthalate membranes for cardiovascular tissue engineering”, Journal of Endovascular Therapy, submitted, 2024.

M. A. Jumat, J. Ambreen, P. Chevallier, D. Mantovani, H.-M. Wang and S. Saidin, “Haemocompatible dual-functional surfaces of everolimus-immobilised polydopamine scaffolds in supporting abluminal endothelialisation and inhibiting luminal cell growth for drug-eluting stent development”, Histochemistry and Cell Biology, submitted, 2024.

M. Sadia, N. N. Ab’lah, A.h S. Kamarozaman, S. G. Muhammad Mehdi, I. A. Channa, S. A. Ammar Taqvi, S. K. Jaganathan, E. H. Mirza and S. Saidin, “Impact of crystallite size on surface roughness, antibacterial efficacy and hemocompatible properties of PCL based electrospun membrane for potential wound healing applications”, Arabian Journal for Science and Engineering, submitted, 2024.

A. K. Nasution, F. Andrean, R. Gunawan, R. Syafri, N. G. Tuti, S. Saidin and M. H. Ramlee, “Nanofibre composite PCL/HA coating by spray method on metallic implant materials for medical applications: a study on the different spraying distances and pressures”, International Journal of Surface Science and Engineering, vol. 18, pp. 55–70, 2024. https://doi.org/10.1504/IJSURFSE.2024.136668

M. Hao, W. Wang, A. Kumar, W. H. A. Kamaruddin, S. Saidin, N. A. N. Nik Malek, J. Claverie and H. Liu, “Magnetic hydroxyapatite nanobelt‐stem cell hybrid spheroids for remotely patterning bone tissues”, BMEMat, vol. 1, pp. e12074, 2024. https://doi.org/10.1002/bmm2.12059

H. Sajid, S. Ali, J. Ambreen, U. Naz, S. Khan, S. N. Shah, S. Saidin and A. Mumtaz, “Efficient CO release from plasmonic Pt using 1D BiVO4@TiO2 heterojunctions for improved electrocatalytic and photoelectrocatalytic methanol oxidation”, New Journal of Chemistry, vol. 48, pp. 3551–3562, 2024. https://doi.org/10.1039/D3NJ04441F

T. P. Malick, K. Vangetaraman, S. Saidin and A. K. Nasution, “Tissue engineering for cardiovascular regeneration: Brief review on scaffold fabrication”, Journal of Human Centered Technology, vol. 3, pp. 40–45, 2024. https://doi.org/10.11113/humentech.v3n1.70

F. A. Shabira, D. F. Khrisna, E. Supriyanto, J. Haueisen and S. Saidin, “Characterisation analyses on silver nanoparticles grafted polyurethane as a potential material for electroencephalography electrodes”, Journal of Human Centered Technology, pp. 211–219, 2024.

J. Sheikh, S. Saidin, S. Ahmed Malik, T. S. Tan, L. S. Chua, A. A. I. Mohamed Ahmed, M. Kun, M. F. T. Tiong and K. M. Leong, “Enhanced irradiance levels using synergistically engineered monochromatic wavelength ultraviolet-C arrays configuration”, Journal of Human Centered Technology, vol. 3, pp. 53–60, 2024. https://doi.org/10.11113/humentech.v3n1.73

D. F. Khrisna, N. Muhamad Zain, N. Mohd Daud, F. Abdullah, N. A. N. Nik Malik and S. Saidin, “Morphological and characterization analysis of PCL/estradiol electrospun membrane for bone regeneration application”, Advances in Science & Technology, vol. 143, pp. 1–14, 2024. https://doi.org/10.4028/p-NQl7Kw

K. Vangetaraman, A. Asiri, S. Sivalingam, A. Ahmad Syafi, K. Jemon and S. Saidin, “Morphology and wettability analyses on electrospun polyvinyl alcohol/elastin nanofibers at varying voltages and composition”, Advances in Science & Technology, vol. 143, pp. 41–46, 2024. https://doi.org/10.4028/p-ARiH8R

R. Gopal, M. F. M. Shakhih, M. Sahalan, L. Te Chuan, H. Hermawan, S. Sivalingam, S. Kadiman and S. Saidin, “Immobilization of blood coagulant Factor VII on polycaprolactone membrane through polydopamine grafting”, Colloids and Surfaces B: Biointerfaces, vol. 113390, 2023. https://doi.org/10.1016/j.colsurfb.2023.113390

M. Sadia, M. A. Mohd Zaki, S. K. Jaganathan, M. F. Md Shakhih, A. S. Kamarozaman, N. Ab’lah and S. Saidin, “Blending of Moringa oleifera into biodegradable polycaprolactone/silver electrospun membrane for wound healing system”, Arabian Journal for Science and Engineering, pp. 1–14, 2023. https://doi.org/10.1007/s13369-023-07736-6

P. Mohanadas, V. Nair, A. Abbas, A. A. Mohd Faudzi, N. Tucker, A. F. Ismail, S. Ramakrishna, S. Saidin and S. K. Jaganathan, “A systematic analysis of additive manufacturing techniques in the bioengineering of in vitro cardiovascular models”, Annals of Biomedical Engineering, pp. 1–19, 2023. https://link.springer.com/article/10.1007/s10439-023-03322-x

J. Alipal, S. Saidin, A. Z. K. Lo, P. Koshy, H. Z. Abdullah, M. I. Idris and T. C. Lee, “In vitro surface efficacy of cap-based anodised titanium for bone implants”, Surfaces and Interfaces, vol. 39, pp. 102872, 2023. https://doi.org/10.1016/j.surfin.2023.102872

T. Selvaras, S. Ali Alshamrani, R. Gopal, S. K. Jaganathan, S. Sivalingam, S. Kadiman and S. Saidin, “Biodegradable and antithrombogenic chitosan/elastin blended polyurethane electrospun membrane for vascular tissue integration”, Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 111, pp. 1171–1181, 2023. https://doi.org/10.1002/jbm.b.35

I. Pathak, B. Dahal, D. Acharya, K. Chhetri, A. Muthurasu, Y. R. Rosyara, T. K., S. Saidin, T. H. Ko and H. Y. Kim, “Integrating V-doped CoP on Ti₃C₂T_x MXene-incorporated hollow carbon nanofibers as a freestanding positrode and MOF-derived carbon nanotube negatrode for flexible supercapacitors”, Journal of Chemical Engineering, vol. 475, pp. 146351, 2023. https://doi.org/10.1016/j.cej.2023.146351

D. Acharya, T. H. Ko, R. M. Bhattarai, A. Muthurasu, T. Kim, S. Saidin, J. -S. Choi, K. Chhetri and H. Y. Kim, “Double-phase engineering of cobalt sulfide/oxyhydroxide on metal-organic frameworks derived iron carbide-integrated porous carbon nanofibers for asymmetric supercapacitors”, Advanced Composites and Hybrid Materials, vol. 6, pp. 179, 2023. https://doi.org/10.1007/s42114-023-00755-9

I. Pathak, D. Acharya, K. Chhetri, P. C. Lohani, T. H. Ko, A. Muthurasu, S. Subedi, T. Kim, S. Saidin, B. Dahal and H. Y. Kim, “Ti3C2Tx MXene integrated hollow carbon nanofibers with polypyrrole layers for MOF-derived freestanding electrodes of flexible asymmetric supercapacitors”, Chemical Engineering Journal, vol. 143388, 2023. https://doi.org/10.1016/j.cej.2023.143388

D. Acharya, I. Pathak, A. Muthurasu, R. M. Bhattarai, T. Kim, T. H. Ko, S. Saidin, K. Chhetri and H. Y. Kim, “In situ transmogrification of nanoarchitectured Fe-MOFs decorated porous carbon nanofibers into efficient positrode for asymmetric supercapacitor application”, Journal of Storage Energy, vol. 63, 2023. https://doi.org/10.1016/j.est.2023.1069

D. Acharya, A. Muthurasu, T. H. Ko, R. M. Bhattarai, T. Kim, S.-H. Chae, S. Saidin, K. Chhetri and H. Y. Kim, “Iron MOF-Derived Fe₂O₃/NPC decorated on MIL-88A converted Fe₃C implanted electrospun porous carbon nanofibers for symmetric supercapacitors”, ACS Applied Energy Materials, accepted, 2023. https://doi.org/10.1021/acsaem.3c00567

M. Sadia, N. Muhamad Zain, N. Mohd Daud, F. Abdullah, A. D. Chandio, I. A. Channa, S. A. Ammar Taqvi, N. A. N. Nik Malek and S. Saidin, “Electrospun membrane fabrication in assisting tissues healing”, Journal of Human Centered Technology, vol. 2, pp. 26–34, 2023. https://doi.org/10.11113/humentech.v2n2.55

D. F. Khrisna, M. A. Jumat, K. Jemon and S. Saidin, “Antibacterial analysis on everolimus grafted biomaterial surfaces using polydopamine intermediate layer for potential use on medical devices”, Journal of Human Centered Technology, vol. 2, pp. 11–18, 2023. https://doi.org/10.11113/humentech.v2n2.52

M. A. Jumat, K. Vangetaraman, A. Ahmad Shafi, N. Muhamad Zain and S. Saidin, “Biodegradable polymeric stent: Poly (lactic acid) variation”, Journal of Human Centered Technology, vol. 2, pp. 19–25, 2023. https://doi.org/10.11113/humentech.v2n2.53

F. A. Shabira, D. F. Khrisna, E. Supriyanto, J. Haueisen and S. Saidin, “Characterisation analyses on silver nanoparticles grafted polyurethane as a potential material for electroencephalography electrodes”, Journal of Materials in Life Sciences, vol. 2, pp. 211–219, 2023. https://doi.org/10.11113/jomalisc.v2.47

S. Tan, J. Sheikh, S. Saidin, S. A. Malik, L. S. Chua, M. T. F. Thye and J. H. Tan, “Surface bacterium disinfection using everlight 6565 UV-C SMD”, Journal of Human Centered Technology, vol. 2, pp. 11–17, 2023. https://doi.org/10.11113/humentech.v2n1.33

N. S. Zakaria, N. Ahmat, N. Adnan, N. N. Azmin, F. I. Azman, N. Ab’lah, S. Saidin and A. S. Kamarozaman, “Resveratrol oligomers from the twigs of Neobalanocarpus heimii (King) PS Ashton (Dipterocarpaceae)”, Planta Medica, vol. 89, pp. P-090, 2023. https://doi.org/10.1055/s-0043-1773974

M. A. Jumat, P. Chevallier, D. Mantovani and S. Saidin, “Everolimus immobilisation using polydopamine intermediate layer on poly(l-lactic acid)/poly(d-lactic acid) scaffold for sustainable anti-proliferative drug release”, Materials Today Communications, vol. 31, pp. 103720, 2022. https://doi.org/10.1016/j.mtcomm.2022.103720

J. Alipal, S. Saidin, H. Z. Abdullah, M. I. Idris and T. C. Lee, “Physicochemical and cytotoxicity studies of a novel hydrogel nanoclay EPD coating on titanium made of chitosan/gelatin/halloysite for biomedical applications”, Materials Chemistry and Physics, vol. 290, pp. 126543, 2022. https://doi.org/10.1016/j.matchemphys.2022.126543

M. P. Mani, M. Sadia, S. K. Jaganathan, A. Z. Khudzari, E. Supriyanto, S. Saidin, S. Ramakrishna, A. F. Ismail and A. A. Mohd Faudzi “A review on 3D printing in tissue engineering applications”, Journal of Polymer Engineering, vol. 42, pp. 243–265, 2022. https://doi.org/10.1515/polyeng-2021-0059

A. K. Nasution, H. Gustami, S. Suprastio, M. A. Fadillah, J. Octavia and S. Saidin, “Potential use of friction welding for fabricating semi-biodegradable bone screws”, International Journal of Automotive and Mechanical Engineering, vol. 19, pp. 9660–9667, 2022. https://doi.org/10.15282/ijame.19.2.2022.03.0745

T. Selvaras, S. K. Jaganathan, S. Sivalingam and S. Saidin, “Degradation analysis on electrospun membrane of polyurethane blended chitosan for cardiovascular graft”, Journal of Human Centered Technology, vol. 1, pp. 18–22, 2022. https://doi.org/10.11113/humentech.v1n1.8

R. Gopal, N. M. Zain and S. Saidin, “Poly (l-lactide) membrane as an elastic membrane to support cardiac bleeding intervention”, Materials Science Forum, vol. 1053, pp. 98–103, 2022. https://doi.org/10.4028/p-iept32

J. S. Pupathi, M. A. Jumat, N. M. Zain and S. Saidin, “Tailoring the everolimus immobilisation time on poly (l-lactic acid/poly (d-lactic acid) scaffold for biodegradable stent coating development”, Materials Science Forum, vol. 1053, pp. 85–90, 2022. https://doi.org/10.4028/p-u3b7dr

A. S. S. Alhammadi, S. Saidin and M. H. Ramlee, “Simulation analyses related to human bone scaffold: Utilisation of Solidworks® software in 3D modelling and mechanical simulation analyses”, Journal of Human Centered Technology, vol. 1, pp. 97–104, 2022. https://doi.org/10.11113/humentech.v1n2.28

M. A. Jumat, M. S. A. Hamzah, N. M. Daud and S. Saidin, “Evaluation on the antibacterial activity and biocompatibility natural soap formulated with edible bird nest”, Journal of Medical Device Technology, vol. 1, pp. 1–3, 2022. https://doi.org/10.11113/jmeditec.v1n1.7

S. Saidin, M. A. Jumat, N. A. A. Mohamad Amin and A. S. Saleh Al-Hammadi, “Organic and inorganic antibacterial approaches in combating bacterial infection for biomedical application”, Materials Science & Engineering C, vol. 118, pp. 1–18, 2021. https://doi.org/10.1016/j.msec.2020.111382

J. Sheikh, T. Tian Swee, S. Saidin, A. Yahya, S. Ahmad Malik, J. S. Sin Yin and T. Foh Thye, “Bacterial disinfection and cell assessment post ultraviolet-C LED exposure for wound treatment”, Medical & Biological Engineering & Computing, vol. 59, pp. 1055–1063, 2021. https://doi.org/10.1007%2Fs11517-021-02360-8

M. A. Jumat, P. Chevallier, D. Mantovani, F. Copes, A. I. Abd Razak and S. Saidin, “Three-dimensional printed biodegradable poly(l-lactic acid)/(poly(d-lactic acid) scaffold as an intervention of biomedical substitute”, Polymer-Plastics and Technology Materials, vol. 60, pp. 1005–1015, 2021. https://doi.org/10.1080/25740881.2021.1876879

A. Asiri, S. Saidin, M. H. Sani and R. H. Al-Ashwal, “Epidermal and fibroblast growth factors incorporated polyvinyl alcohol electrospun nanofibers as biological dressing scaffold”, Scientific Reports, vol. 11, pp. 5634, 2021. https://www.nature.com/articles/s41598-021-85149-x

A. Z. K. Lo, S. K. Lukman, C.-H. Lai, N. Muhamad Zain and S. Saidin, “Stingless bee honey incorporated cellulose hydrogel/poly(lactic-co-glycolic acid) patch as an alternative treatment for aphthous stomatitis”, Cellulose Chemistry & Technology, vol. 55, pp. 539–603, 2021. https://doi.org/10.35812/cellulosechemtechnol.2021.55.48

M. F. Mohd Yusoff, N. H. Abu Kasim, W. H. Himratul-Aznita, S. Saidin, K. Genasan, T. Kamarul and Z. Radzi, “Physicochemical, antibacterial and biocompatibility assessments of silver incorporated nano-hydroxyapatite synthesized using a novel microwave-assisted wet precipitation technique”, Materials Characterization, vol. 178, pp. 111169, 2021. https://doi.org/10.1016/j.matchar.2021.111169

M. A. Jumat, N. S. Zahidin, M. A. A. Zaini, N. A. Fadzil, H. Nur and S. Saidin, “Incorporation of Acalypha indica extract in polyvinyl alcohol hydrogels: Physico-chemical, antibacterial and cell compatibility analyses”, Jurnal Teknologi, vol. 83, pp. 57–65, 2021. https://doi.org/10.11113/jurnalteknologi.v83.14763

R. Gopal, A. Z. K. Lo, N. M. Masrol, C-H Lai, N. M. Zain and S. Saidin, “Susceptibility of stingless bee, giant bee and asian bee honeys incorporated cellulose hydrogels in treating wound infection”, Malaysian Journal of Fundamental and Applied Sciences, vol. 17, pp. 242–252, 2021. https://doi.org/10.11113/mjfas.v17n3.2049

H. -Y. Li, H. -C. Lin, B. -J. Huang, A. Z. K. Lo, S. Saidin and C. -H. Lai, “Size preferences uptake of glyco-silica nanoparticles to MDA-MB-231 cell”, Langmuir, vol. 36, pp. 11374–11382, 2020. https://doi.org/10.1021/acs.langmuir.0c02297

S. K. Lukman and S. Saidin, “Effects of different polyaniline emeraldine compositions in electrodepositing ginsenoside encapsulated poly(lactic-co-glycolic acid) microcapsules coating: Physico-chemical characterization and in-vitro evaluation”, Journal of Biomedical Materials Research Part A, vol. 108, pp. 1171–1185, 2020. https://doi.org/10.1002/jbm.a.36891

A. Z. K. Lo, S. K. Lukman and S. Saidin, “Encapsulation of ginseng inside poly(lactic-co-glycolic acid)/polyaniline microcapsules”, Malaysian Journal of Medicine and Health Sciences, vol. 16, pp. 1–5, 2020. https://medic.upm.edu.my/upload/dokumen/2020082609273701_MJMHS_0613.pdf

S. K. Lukman, R. H. Al-Ashwal, N. Sultana and S. Saidin, “Electrodeposition of ginseng/polyaniline encapsulated poly(lactic-co-glycolic acid) microcapsule coating on stainless steel 316L at different deposition parameters”, Chemical and Pharmaceutical Bulletin, vol. 67, pp. 445–451, 2019. https://doi.org/10.1248/cpb.c18-00847

S. K. Lukman, R. H. Al-Ashwal and S. Saidin, “Emerging of cardiovascular metal stent: Utilisation of drugs in preventing complications following stent implantation”, Malaysian Journal of Fundamental and Applied Sciences, vol. 15, pp. 225–231, 2019. https://doi.org/10.11113/mjfas.v15n2.1115

N. Mohd Daud, R. H. Al-Ashwal, M. R. Abdul Kadir and S. Saidin, “Polydopamine-assisted chlorhexidine immobilization on medical grade stainless steel 316L: Apatite formation and in vitro osteoblastic evaluation”, Annals Anatomy, vol. 220, pp. 29–37, 2018. https://doi.org/10.1016/j.aanat.2018.06.009

C. Y. Foong, M. S. A. Hamzah, S. I. A Razak, S. Saidin and N. H. M. Nayan, “Influence of poly (lactic acid) layer on the physical and antibacterial properties of dry bacterial cellulose sheet for potential acute wound healing materials”, Fibers and Polymers, vol. 19, pp. 263–271, 2018. https://doi.org/10.1007/s12221-018-7850-7

N. Mohd Daud, N. A. Masri, N. A. N. Nik Malek, S. I. Abdul Razak and S. Saidin, “Long-term antibacterial and stable chlorhexidine-polydopamine coating on stainless steel 316L”, Progress in Organic Coatings, vol. 122, pp. 147–153, 2018. https://doi.org/10.1016/j.porgcoat.2018.05.012

Z. Tapsir, F. H. Jamaludin, B. Pingguan-Murphy and S. Saidin, “Immobilisation of hydroxyapatite-collagen on polydopamine grafted stainless steel 316L: Coating adhesion and in vitro cells evaluation”, Journal of Biomaterials Applications, vol. 32, pp. 987–995, 2018. https://doi.org/10.1177/0885328217744081

M. R. Abdul Hanan, A. K. Nasution, R. Hussain and S. Saidin, “Fabrication of poly(lactic-co-glycolic acid) / calcium phosphate bone cement composite: Synthesization of calcium phosphate from crab shells”, Jurnal Teknologi, vol. 80, pp. 103–109, 2018. http://dx.doi.org/10.11113/jt.v80.11525

N. S. Zahidin, R. Mohamed Zulkifli, I. I. Muhamad, H. Ya’akob, H. Nur, A. H. Mohd Shariff and S. Saidin, “Preliminary study of potential herbal tea, Acalypha indica and comparison with domestic tea in Malaysia market”, Food Science and Technology, vol. 6, pp. 41–45, 2018. http://dx.doi.org/10.13189/fst.2018.060105

N. S. Zahidin, S. Saidin, R. M. Zulkifli, I. I. Muhamad, H. Ya’akob and H. Nur, “A review of Acalypha indica L.(Euphorbiaceae) as traditional medicinal plant and its therapeutic potential”, Journal of Ethnopharmacology, vol. 207, pp. 146–173, 2017. https://doi.org/10.1016/j.jep.2017.06.019

N. N. Saarani, J. –T. Kalitheerta, N. Shahab, H. Hermawan and S. Saidin, “Antibacterial efficacy of triple-layered poly(lactic-co-glycolic acid)/nanoapatite/lauric acid guided bone regeneration membrane on periodontal bacteria”, Dental Materials Journal, vol. 36, pp. 1–5, 2017. https://doi.org/10.4012/dmj.2016-177

Z. Miswan, F. A. Abd. Majid, L. Mun Fai, S. Saidin and H. Hermawan, “Drug-eluting coating of ginsenoside Rg1 and Re incorporated poly(lactic-co-glycolic acid) on stainless steel 316L using dip coating technique: Coating optimization and drug release analysis”, International Journal of Pharmaceutics, vol. 515, pp. 460–466, 2016. https://doi.org/10.1016/j.ijpharm.2016.10.056

N. Mohd Daud, I. Fithriyana, N. A. N. Nik Malek, H. Hermawan and S. Saidin, “Immobilization of antibacterial chlorhexidine on stainless steel using crosslinking polydopamine film: Towards infection resistant medical devices”, Colloids and Surfaces B: Biointerfaces, vol. 145, pp. 130–139, 2016. https://doi.org/10.1016/j.colsurfb.2016.04.046

Z. Tapsir and S. Saidin, “Synthesis and characterization of collagen-hydroxyapatite immobilized on polydopamine grafted stainless steel”, Surface & Coatings Technology, vol. 285, pp. 11–16, 2016. https://doi.org/10.1016/j.surfcoat.2015.11.024

M. H. Mohd Tajudin, Z. Tapsir, L. H. Ismail and S. Saidin, “Formation of carbonated apatite layer in 1.5× simulated body fluid at different refreshing time”, Key Engineering Materials, vol. 705, pp. 304–308, 2016.  https://doi.org/10.4028/www.scientific.net/KEM.705.304

M. F. Md Nor, M. R. Abdul Hanan, Z. N. Zamal, N. M. Daud, Z. Tapsir and S. Saidin, “Synthesis of calcium phosphate at different pH condition”, Journal of Advanced Research in Materials Science, vol. 13, pp. 11–15, 2015. http://www.akademiabaru.com/doc/ARMSV13_N1_P11_15.pdf

J. Amer Nordin, D. H. Prajitno, H. Nur and H. Hermawan, “Structure-property relationships of iron-hydroxyapaite ceramic matrix nanocomposite fabricated using mechanosynthesis method”, Materials Science & Engineering C, vol. 51, pp. 294–299, 2015. https://doi.org/10.1016/j.msec.2015.03.019

M. F. Md Nor, M. R. Abdul Hanan, Z. N. Zamal, N. M. Daud, Z. Tapsir and S. Saidin, “Synthesis of calcium phosphate at different pH condition”, Journal of Advanced Research in Materials Science, vol. 13, pp. 11–15, 2015. https://www.akademiabaru.com/doc/ARMSV13_N1_P11_15.pdf

S. Saidin, P. Chevallier, H. Hermawan and D. Mantovani, “Surface characterization of biomimetic hydroxyapatite-silver functionalized on polydopamine film”, Advanced Materials Research, vol. 1125, pp. 395–400, 2015. https://doi.org/10.4028/www.scientific.net/AMR.1125.395

A. A. Mustafa, J. P. Matinlinna, S. Saidin and M. R. Abdul Kadir, “The influence of experimental silane primers on dentin bond strength and morphology: A laboratory and finite element analysis study”, The Journal of Prosthetic Dentistry, vol. 112, pp. 1498–1506, 2014. https://doi.org/10.1016/j.prosdent.2014.05.011

A. A. Madfa, M. R. Abdul Kadir, J. Kashani, S. Saidin, E. Sulaiman, J. Marhazlinda, R. Rahbari, B. J. J. Abdullah, H. Abdullah and N. H. Abu Kasim, “Stress distributions in maxillary central incisors restored with various types of post materials and designs”, Medical Engineering & Physics, vol. 36, pp. 962–967, 2014. https://doi.org/10.1016/j.medengphy.2014.03.018

S. Saidin, P. Chevallier, M. R. Abdul Kadir, H. Hermawan and D. Mantovani, “Polydopamine as an intermediate layer for silver and hydroxyapatite immobilisation on metallic biomaterials surface”, Materials Science & Engineering C, vol. 33, pp. 4715–4724, 2013. https://doi.org/10.1016/j.msec.2013.07.026

S. Saidin, M. R. Abdul Kadir, N. H. Abu Kasim and E. Sulaiman, “Effects of different implant–abutment connections on micromotion and stress distribution: Prediction of microgap formation”, Journal of Dentistry, vol. 40, pp. 467–474, 2012. https://doi.org/10.1016/j.jdent.2012.02.009

Vangetaraman, H. H. Hredoy, T. Selvaras, M. Sadia, A. Ahmad Shafi, S. Sivalingam, S. K. Jaganathan, Y. K. Hak and S. Saidin, “Fabrication of polyurethane/chitosan electrospun vascular graft using rotating collector at different applied voltages and rotation speeds”, Asia-Pacific Society for Artificial Organs (APSAO) Congress, accepted, 2023.

A. Abdul Samad, N. Jusoh, S. I. Abd Razak, S. Saidin and M. Sahalan, “Low-temperature thermal treatment’s impact on hydroxyapatite nanofiber characteristics”, Materials Today: Proceedings, in press, 2023. https://doi.org/10.1016/j.matpr.2023.09.200

M. Sadia, F. A. Manan, N. I. Ismail, S. K. Jaganathan and S. Saidin, “Extraction of bioactive compounds from Moringa oleifera leaves using different organic solvents”, AIP Conference Proceedings, vol. 2601, pp. 1–6, 2023. https://doi.org/10.1063/5.0129684

M. A. Jamil, N. A. Abd Rahman, M. N. Adon, R. Ambar, F. Javid, M. Youseffi and S. Saidin, “Study on Cannabidiol and pulse electric field on breast cancer cells”, 19th IEEE International Colloquium on Signal Processing & Its Applications (CSPA), pp. 283–286, 2023. https://doi.org/10.1109/CSPA57446.2023.10087551

N. Mohd Qari, L. Te Chuan, H. H. Hredoy, A. A. Al-Dubai and S. Saidin, “Computed post-analyses on the morphology of hydroxyapatite coated poly(lactic acid) scaffolds”, 2nd International Conference on Intelligent Cybernetics Technology & Applications (ICICyTA), pp. 255–260, 2022. https://doi.org/10.1109/ICICyTA57421.2022.10037863

M. M. Abdul Jamil, N. A. Abd Rahman, M. N. Adon, R. Ambar and S. Saidin, “Local honey (Tualang & Kelulut) effect on breast cancer cell (MCF-7)”, IEEE 12th International Conference on Control System, Computing and Engineering (ICCSCE), pp. 209–213, 2022. https://doi.org/10.1109/ICCSCE54767.2022.9935580

N. M. Zain, S. Saidin and A. Sosiawan, “Properties of tilapia collagen as a biomaterial for tissue engineering: A review”, IOP Conference Series: Materials Science and Engineering, vol. 932, pp. 012021, 2020. https://doi.org/10.1088/1757-899X/932/1/012021

Y. Tey, A. M. M. Shah, M. S. Z. Abidin and S. Saidin, “Design and characterization of impedance based E. coli sensor”, IEEE International Conference on Semiconductor Electronics, vol. 9166892, pp. 96–99, 2020. https://doi.org/10.1109/ICSE49846.2020.9166892

S. K. Lukman, R. H. Al-Ashwal, A. Z. Md Khudzari and S. Saidin, “Different amount of ginseng encapsulated in poly(lactic-co-glycolic acid) microcapsules: A preliminary study”, AIP Conference Proceedings, vol. 2155, pp. 020007, 2019. https://doi.org/10.1063/1.5125511

A. Asiri, R. H. Al-Ashwal and S. Saidin, “Effects of electrospinning voltage and flow rate on morphology of polyvinyl alcohol nanofibers”, Journal of Physics: Conference Series, vol. 1372, pp. 012035, 2019. https://doi.org/10.1088/1742-6596/1372/1/012035

H. N. Abdul Halim, A. Azaman, H. Manaf, S. Saidin, I. Zulkapri and A. Yahya “Gait asymmetry assessment using muscle activity signal: A review of current methods”, Journal of Physics: Conference Series, vol. 1372, pp. 012075, 2019. https://doi.org/10.1088/1742-6596/1372/1/012075

N. Mohd Daud, Z. Tapsir, A. Idris, A. K. Nasution and S. Saidin, “Synthesization and characterization of chlorhexidine/calcium phosphate/poly(lactic-co-glycolic acid) bone cement”, IOP Conference Series: Materials Science and Engineering, vol. 532, pp. 012026, 2019. https://doi.org/10.1088/1757-899X/532/1/012026

S. K. Lukman and S. Saidin, “Antibacterial effect of ginseng/polyaniline encapsulated in poly(lactic-co-glycolic acid) microcapsules coating on stainless steel 316L”, MATEC Web of Conferences, vol. 253, pp. 1-7, 2019. https://doi.org/10.1051/matecconf/201925303001

S. K. Lukman, A. Lo Zhen Khai, R. H. Al-Ashwal and S. Saidin, “Ginseng encapsulated in poly(lactic-co-glycolic acid) microcapsules for Drug Delivery”, ACM International Conference Proceeding Series, vol. Part F132884, pp. 101–104, 2017. https://doi.org/10.1145/3155077.3155096

N. Mohd Daud, N. A. N. Nik Malek and S. Saidin, “Influence of coating time on immobilization of chlorhexidine on polydopamine grafted stainless steel 316L: Adsorption and cytotoxicity analyses”, ACM International Conference Proceeding Series, vol. Part F132884, pp. 97–100, 2017. https://doi.org/10.1145/3155077.3155095

M. R. Abdul Hanan, N. M. Daud, L. H. Ismail and S. Saidin, “Synthesization and characterization of poly(lactic-co-glycolic acid) / calcium phosphate bone cement from crab shells”, IOP Conf. Series: Materials Science and Engineering, vol. 201, pp. 260–265, 2017. https://doi.org/10.1088/1757-899X/201/1/012010

S. Saidin, M. R. Abdul Kadir, N. H. Abu Kasim and E. Sulaiman, “Influence of stress distribution and micromotion at implant-abutment connections”, in Seminar on Intelligent Technology and Its Applications (SITIA), 2010.

S. Saidin, M. R. Abdul Kadir, N. H. Abu Kasim and E. Sulaiman, “Finite element analysis on internal hexagonal and internal conical abutment”, in IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES), article no. 5742231, pp. 216–220, 2010. https://doi.org/10.1109/IECBES.2010.5742231

S. Saidin, M. R. Abdul Kadir, N. H. Abu Kasim and E. Sulaiman, “Finite element analysis on different depth of internal hexagonal abutment”, in International Graduate Conference on Engineering, Science and Humanities (IGCESH), 2010.

R. Sudirman, S. Saidin and N. M. Safri, “Study of electroencephalography signal of autism and down syndrome children using FFT”, in IEEE Symposium on Industrial Electronics & Applications (ISIEA), article no. 5679434, pp. 401–406, 2010. https://doi.org/10.1109/ISIEA.2010.5679434

Saidin, N Muhamad Zain and N. Mohd Daud, “Polymeric Materials for Drug Delivery: Insight into Biomedical Applications“, 1st ed. Malaysia: Penerbit UTM Press, submitted, 2024.

S. K. Lukman, I. Fithriyana and S. Saidin, Stainless steel in implant application in “Progress in Applied Materials Science“, 1st ed. Malaysia: Penerbit UTM Press, 2018.

Z. Tapsir, R. H. Al-Ashwal and S. Saidin, Hydroxyapatite and collagen as main bioactive components in osseointegrated implant in “Progress in Applied Materials Science“, 1st ed. Malaysia: Penerbit UTM Press, 2018.

N. A. Masri, N. Mohd Daud and S. Saidin, Stability analysis of chlorhexidine coating grafted stainless steel in “Recent Advances in Medical Engineering“, 1st ed. Malaysia: Penerbit UTM Press, 2017.

S. Saidin, A. Lo Zhen Kai, N. M. Zain and M. Sadia “Honey Hydrogel Patch for Ulcer Treatment”, copyright, LY2022J01473, granted, 2022.

Saidin, M. A. Jumat, N. M. Zain and N. Jusoh, “3D Printed Stereocomplex PLLA/PDLA Scaffold”, copyright, LY2021J06648, granted, 2021.

S. Saidin, S. K. Lukman and A. L. Zhen Kai, “Ginseng Encapsulated Microcapsules Coating”, copyright, LY2020004252, granted, 2020.

S. Saidin, A. R. Rashidi and M. R. Abdul Hanan, “Bone Cement Containing Phosphate from Crab Shell”, copyright, LY2018006200, granted, 2019.

S. Saidin, N. I. Ismail, H. Nur and N. S. Zahidin, “Acalypha indica Hydrogel”, copyright, LY2019005497, granted, 2018.

S. Saidin, M. Sadia, A. S. Kamarozaman and N. M. Zain, “Moringa oleifera Herbal Based Membrane”, copyright, LY2023J05665, granted, 2022.

S. Saidin, R. Gopal and S. Kadiman, “Factor VII Polymeric Cardiac Patch“,  patent, IP/PT/02333, submitted, 2023.

2024. Saidin, T. Selvaras, K. Vangetaraman and S. Sivalingam, “Biodegradable Electrospun Polyurethane/Chitosan/Elastin Vascular Patch”, copyright, IP/CR/05675, submitted, 2024.

S. Saidin, M. Sadia, N. I. Ismail and F. Abd Manan, “Antioxidant Moringa oleifera Extraction”, copyright, IP/CR/04242, submitted, 2022.

S. Saidin, R. H. Al-Ashwal, N. Mohd Daud and Z. Tapsir, “Antibacterial Chlorhexidine Bone Cement”, copyright, IP/CR/2018/0314, submitted, 2018.

S. Saidin, B. Pingguan-Murphy and Z. Tapsir, “Immobilised Bioactive Hydroxyapatite-Collagen Coating”, copyright, IP/CR/2017/0615, submitted, 2017.