SCOPUS Journals

Al-Alaq 5

  1. Davood Almasi, Izman Sudin, Maliheh Sadeghi, Nida Iqbal, Fatemeh Roozbahani, G. Krishnamurthy, Tunku Kamarul & Mohammed Rafiq Abdul Kadir, “In Vitro Evaluation of Bioactivity of Chemically Deposited Hydroxyapatite on Polyether Ether Ketone” International Journal of Biomaterials (SCOPUS), accepted, in-press, 2015.
  2. Harintharavimal Balakrishnan, Muhamad Rasyidi Husin, Mat Uzir Wahit & Mohammed Rafiq Abdul Kadir, “Preparation and Characterization of Organically Modified Montmorillonite-Filled High Density Polyethylene /Hydroxyapatite Nanocomposites for Biomedical Applications“ Polymer-Plastics Technology and Engineering (SCOPUS), Vol. 53, pg. 790-800, 2014.
  3. Gan Hong Seng, Tan Tian Swee, Ahmad Helmy Abdul Karim, Khairil Amir Sayuti, Mohammed Rafiq Abdul Kadir, Tham Weng-Kit, Wong Liang-Xuan, Kashif Chaudhary, Jalil Ali & Preecha Yupapin, “Medical image visual appearance improvement using bi-histogram Bezier curve contrast enhancement“ Scientific World Journal (SCOPUS), accepted, in press, 2014.
  4. Ali Al-Sarhan, Naznin Sultana, Ahed Al-Khatib & Mohammed Rafiq Abdul Kadir, “Review on Some Malaysian Traditional Medicinal Plants with Therapeutic Properties” Journal of Basic and Applied Sciences (SCOPUS), Vol. 10, pg. 149-159, 2014.
  5. Muhammad Hanif Ramlee, Mohammed Rafiq Abdul Kadir & Habibollah Haron, “Three-Dimensional Modelling and Finite Element Analysis of an Ankle External Fixator” Advanced Materials Research (SCOPUS), Vol. 845, pg. 183-188, 2014.
  6. Muhammad Farhan Ishak, Mohammed Rafiq Abdul Kadir, Habibollah Haron & Shaifuzain Ab. Rahman, “The Effect of Cannulated Screw Placement Angle in the Management of Femoral Neck Fracture” Advanced Materials Research (SCOPUS), Vol. 845, pg. 216-220, 2014.
  7. Ng Theng Pin, SSR Koloor, JRP Djuansjah & Mohammed Rafiq Abdul Kadir, “Linear Elastic Analysis of Bovine Cortical Bone under Compression Loading” Advanced Materials Research (SCOPUS), Vol. 845, pg. 324-329, 2014.
  8. Fakhrizal Azmy, Ardiyansyah Syahrom, Muhammad Noor Harun, Mohammed Rafiq Abdul Kadir & Abdul Hafidz Omar, “Finite-element Study on Effect of String Tension toward Coefficient of Restitution of a Badminton Racket String-Bed” Advanced Materials Research (SCOPUS), Vol. 845, pg. 417-420, 2014.
  9. Arman Shah, Izman Sudin, Mohammed Rafiq Abdul Kadir, Mas Ayu Hassan, Mahmood Anwar & Azanizawati Maaram, “Influence of Bias Voltage on Corrosion Resistance of TiN coated on Biomedical TiZrNb Alloy” Advanced Materials Research (SCOPUS), Vol. 845, pg. 436-440, 2014.
  10. Mas Ayu Hassan, Izman Sudin, Mohammed Rafiq Abdul Kadir, Rosdi Daud, Arman Shah, Mohd Faiz Mohd Yusoff, Shamsiah MW, Yong TM & Tunku Kamarul, “Influence of Carbon Concentrations in Reducing Co and Cr Ions Release in Cobalt Based Implant: A Preliminary Report” Advanced Materials Research (SCOPUS), Vol. 845, pg. 462-466, 2014.
  11. Muhammad Jabir Sulaiman, Mohamad Azmiruddin Ahmad, Rosdi Ibrahim, Mazlan Mohamad, Noor Hayaty Abu Kassim, Mohammed Rafiq Abdul Kadir, Shamsul Muhamad, Yoshinori Itoh, Kotaro Hanada & Toru Shimizu, “Physical and Mechanical Properties of Sintered Titanium Alloy Produced Through Metal Injection Molding (MIM) Process for Craniofacial Application” Advanced Materials Research (SCOPUS), Vol. 879, pg. 85-89, 2014.
  12. Anisah Zainal, Naznin Sultana & Mohammed Rafiq Abdul Kadir, “Fabrication and characterization of Cellulose Acetate Nanofibers” Advanced Materials Research (SCOPUS), Vol. 1030-1032, pg. 78-81, 2014.
  13. Azli Yahya, Razaudeen Zulkifli, Muhammad Arif, Trias Andromeda, Nor Azlina Ahmad, Mohammed Rafiq Abdul Kadir, & Ameruddin Baharom, “Development of Gel Electrophoresis Unit to Reduce DNA Separation Process Time – A Proof of Concept” Journal of Bionanoscience, Vol. 7(2), pg. 210-214, 2013.
  14. Tham Weng Hong, Mat Uzir Wahit, Mohammed Rafiq Abdul Kadir & Wong Tuck Whye, “Mechanical and thermal properties of biodegradable hydroxyapatite /poly(sorbitol sebacate malate) composites” the Songklanakarin Journal of Science and Technology, Vol. 35(1), pg. 57-61, 2013.
  15. Fatihhi SJ, Ardiyansyah Syahrom, Muhammad Noor Harun & Mohammed Rafiq Abdul Kadir “Mechanical Properties of Trabecular Bone through Compression and Combined Compression-Torsion Test: A Comparative Study” Applied Mechanics and Materials, Vol. 393, pg. 415-421, 2013.
  16. Milad Heidari, Muhamad Noor Harun, Mohammed Rafiq Abdul Kadir, Jamal Kashani & Ardiyansyah Syahrom, “Effect of humeral stem shape on displacement in elbow implant” Applied Mechanics and Materials, Vol. 393, pg. 467-471, 2013.
  17. Nazriah Mahmud, Azli Yahya, Mohammed Rafiq Abdul Kadir, Trias Andromeda & Nor Liyana Safura Hashim, “Modeling of Flyback Converter for Micro Machining Biomedical Component” Applied Mechanics and Materials, Vol. 284-287, pg. 1028-1032, 2013.
  18. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Nasrul Humaimi Mahmood, Michael Moses, Mashitah Mad Salim & Nik Ahmad Nizam Nik Malek “Effect of silver ions on the structural and antibacterial properties of bone replacement material” Advanced Materials Research, Vol. 795, pg. 692-696, 2013.
  19. Nik Ahmad Nizam Nik Malek, Siti Amirah Ishak & Mohammed Rafiq Abdul Kadir “Antibacterial Activity of Copper and CTAB Modified Clays against Pseudomonas aeruginosa” Advanced Materials Research, Vol. 626, pg. 178-182, 2013.
  20. Abdul Hakim Yusof, Azam Ahmad Bakir, Nur Amirah Shaharom, Mohammed Rafiq Abdul Kadir & Hendra Hermawan, “Porous Biodegradable Metals for Hard Tissue Scaffolds: A review” International Journal of Biomaterials, Article ID 641430, 2012.
  21. Zohreh Arabshahi, Jamal Kashani, S.S.R. Koloor, Mohammed Rafiq Abdul Kadir & Abbas Azari, “Design Analysis of TMJ Implant under Physiological Loading Condition” Advanced Materials Research, Vol. 488-489, pg. 996-1000, 2012.
  22. Izman Sudin, Arman Shah, Mohammed Rafiq Abdul Kadir, Engku Nazim, Mahmood Anwar, Mas Ayu Hassan & Habib Safari “Effect of thermal oxidation temperature on rutile structure formation of biomedical TiZrNb alloy” Advanced Materials Research, Vol. 393-395, pg. 704-708, 2012.
  23. Izman Sudin, Mas Ayu Hassan, Mohammed Rafiq Abdul Kadir, M R Abdullah, Mahmood Anwar, Arman Shah & Rosdi Daud “Effect of Pretreatment Process on Thermal Oxidation of Biomedical Grade Cobalt Based Alloy” Advanced Materials Research, Vol. 399-401, pg. 1564-1567, 2012.
  24. Zohreh Arabshahi, Jamal Kashani, Mohammed Rafiq Abdul Kadir & Abbas Azari, “Influence of the TMJ Implant Geometry on Stress Distribution” Advanced Materials Research, Vol. 488-489, pg. 991-995, 2012.
  25. Milad Heidari, Mohammed Rafiq Abdul Kadir, Ali Fallahi Arezoodar, Muhamad Noor Harun, Mina Alizadeh & Jamal Kashani, “Biomechanical Assessment of Unconstrained Elbow Prosthesis after Total Elbow Replacement: A Finite Element Analysis” Applied Mechanics and Materials, Vol. 234, pg. 7-10, 2012.
  26. Jamal Kashani, Zohreh Arabshahi, Mohammed Rafiq Abdul Kadir & Abbas Azari, “Manufacturing of Flexible Surgical Guide for Fully Edentulous Patients” Advanced Materials Research, Vol. 488-489, pg. 1001-1005, 2012.
  27. S. Izman, Arman Shah, Mohammed Rafiq Abdul Kadir, E.M. Nazim, Mahmood Anwar, M. A. Hassan & Habib Safari, “Effect of Thermal Oxidation Temperature on Rutile Structure Formation of Biomedical TiZrNb Alloy” Advanced Materials Research, Vol. 393-395, pg. 704-708, 2012.
  28. S. Izman, M. A. Hassan, Mohammed Rafiq Abdul Kadir, M. R. Abdullah, Mahmood Anwar, A. Shah & Rosdi Daud, “Effect of Pretreatment Process on Thermal Oxidation of Biomedical Grade Cobalt Based Alloy” Advanced Materials Research, Vol. 399-401, pg. 1564-1567, 2012.
  29. Mahtab Assadian, Mohd Hasbullah Idris, Saleh Mehraban, Sajjad Jafari & Mohammed Rafiq Abdul Kadir, “Effect of HF Concentration on Corrosion Resistance of Biomedical Implants” Advanced Materials Research, Vol. 463-464, pg. 837-840, 2012.
  30. Hamidreza Bakhsheshi Rad, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir, Saeed Farahany, Amir Fereidouni & Mohd Yazid Yahya “Characterisation and Corrosion Behaviour of Biodegradable Mg-Ca and Mg-Ca-Zn Implant Alloys” Applied Mechanics & Materials Vol. 121-126, pg. 568-572, 2012.
  31. Nor Liyana Safura Hashim, Azli Yahya, Trias Andromeda, Mohammed Rafiq Abdul Kadir, Nazriah Mahmud & Syahrullail Samion, “Simulation of PSO-PI Controller of DC Motor in Micro EDM System for Biomedical Applications” Engineering Procedia, Vol. 41, pg. 805-811, 2012.
  32. Naznin Sultana & Mohammed Rafiq Abdul Kadir, “Study of in vitro degradation of biodegradable polymer based thin films and tissue engineering scaffolds” African Journal of Biotechnology, Vol. 10(81), pg. 18709-18715, 2011.
  33. Syahrullail Samion, Nor Azwadi Che Sidek, Mohammed Rafiq Abdul Kadir & Shafie NEA “The Effect of Tool Surface Roughness in Cold Work Extrusion” Journal of Applied Sciences, Vol. 11(2), pg. 367-372, 2011.
  34. S. Izman, Mohammed Rafiq Abdul Kadir, Mahmood Anwar, E.M. Nazim, Adila Nalisa & M. Konneh, “Effect of Carburization Process on Adhesion Strength of Ti Carbide Layer on Titanium Alloy Substrate” Advanced Materials Research, Vol. 197-198, pg. 219-224, 2011.
  35. S. Izman, Mohammed Rafiq Abdul Kadir, Mahmood Anwar, E.M. Nazim, L.Y. Kuan & E.K. Khor, “Effect of Pickling Process on Adhesion Strength of Ti Oxide Layer on Titanium Alloy Substrate” Advanced Materials Research, Vol. 146-147, pg. 1621-1630, 2011.
  36. Muhamad Rasyidi Husin, Mat Uzir Wahit, Mohammed Rafiq Abdul Kadir & Wan Aizan Wan Abdul Rahman, “Effect of Hydroxyapatite Reinforced High Density Polyethylene Composites on Mechanical and Bioactivity Properties” Key Engineering Materials, Vol. 471-472, pg. 303-308, 2011.
  37. Mazatusziha Ahmad, Mat Uzir Wahit, Mohammed Rafiq Abdul Kadir & Khairul Zaman Mohd Dahlan, “Influence of Processing Aids and Hydroxyapatite as Fillers on Flow Behaviour and Mechanical Properties of Ultra High Molecular Weight Polyethylene/High Density Polyethylene Composites” Key Engineering Materials, Vol. 471-472, pg. 827-832, 2011.
  38. Amirhossein Goharian, Ahmad Ramli Rashidi, Mohammed Rafiq Abdul Kadir, Mohamed Ruslan Abdullah & Mat Uzir B. Wahit, “Development of Novel Polymer Composite Beam Using Ultrasonic Welding Process for Acetabular Cup Prosthesis” Key Engineering Materials, Vol. 471-472, pg. 945-950, 2011.
  39. Ruwaida Rosli, Jamal Kashani & Mohammed Rafiq Abdul Kadir, “Effects of Lateral Mass Screw Rod Fixation to the Stability of Cervical Spine after Laminectomy” Physics Procedia, Vol. 22, pg. 408-413, 2011.
  40. Zohreh Arabshahi, Jamal Kashani, Mohammed Rafiq Abdul Kadir & Abbas Azari, “Influence of Thickness and Contact Surface Geometry of Condylar Stem of TMJ Implant on its Stability” Physics Procedia, Vol. 22, pg. 414-419, 2011.
  41. Vijayajothi Paramasivam, Kanesan Muthusamy & Mohammed Rafiq Abdul Kadir, “Mixed Velocity-Pressure (v-p) Finite Element Method in Assessing the Hemodynamic Wall Shear Stresses in a Fusiform Abdominal Aortic Aneurysm” Biomedical Soft Computing and Human Sciences, Vol. 17(1), pg. 81-87, 2011.
  42. Mohammed Rafiq Abdul Kadir, Nazri Kamsah & Alhamzee Idrose, “Biomechanics of a Lumbar Section after Disc Arthroplasty” European Journal of Scientific Research, Vol. 39(1), pg. 22-28, 2010.
  43. Vijayajothi Paramasivam, Nenad Filipovic, Kanesan Muthusamy & Mohammed Rafiq Abdul Kadir, “Finite Element Computation for Solving Pulsatile Blood Flow: Relevance in Assessing the Flow Dynamics in Abdominal Aortic Aneurysms” CFD Letters, Vol. 2(4), pg. 149-162, 2010.
  44. Mohammed Rafiq Abdul Kadir & Nazri Kamsah, “Interface Micromotion of Cementless Hip Stems in Simulated Hip Arthroplasty” American Journal of Applied Sciences, Vol. 6(9), pg. 1682-1689, 2009.
  45. Mohammed Rafiq Abdul Kadir, Nazri Kamsah & Alhamzee Idrose, “Analysis of Glenoid Fixation Features under Simulated Off-Centre Loading” European Journal of Scientific Research, Vol. 36(2), pg. 318-325, 2009.
  46. Mohammed Rafiq Abdul Kadir & Nazri Kamsah, “The Effect of Bone Properties due to Skeletal Diseases on Stability of Cementless Hip Stems” American Journal of Applied Sciences, Vol. 6(12), pg. 1988-1994, 2009.
  47. Mohammed Rafiq Abdul Kadir & Ulrich Hansen, “Incorporation of Interference Fit and Cyclic Loading in Simulation Algorithm for Better Prediction of Micromotion of Femoral Stems” Jurnal Teknologi, UTM, June 2007.
  48. Mohammed Rafiq Abdul Kadir & Ulrich Hansen, “The Effect of Physiological Load Configuration on Interface Micromotion of Cementless Femoral Stems” Jurnal Mekanikal, UTM, June 2007.
  49. Fitdriyah Hussain, Mohammed Rafiq Abdul Kadir, Ahmad Hafiz Zulkifly, Azlin Sa’at, Md. Golam Hossain, Tunku Kamarul & Ardiyansyah Syahrom “Anthropometric Measurements of the Human Distal Femur: A study of the Adult Malay Population” BioMed Research International (SCOPUS), Article ID 175056, 2013.
  50. Harintharavimal Balakrishnan, Muhamad Rasyidi Husin, Mat Uzir Wahit & Mohammed Rafiq Abdul Kadir, “Maleated high density polyethylene compatibilized high density polyethylene/hydroxyapatite composites for biomedical applications: Properties and characterization“ Polymer-Plastics Technology and Engineering (SCOPUS), Vol. 52, pg. 774-782, 2013.
  51. Iqbal Mokhtar, Mohd Yazid Yahya & Mohammed Rafiq Abdul Kadir, “Mechanical Characterization of Basalt/HDPE Composite under In-Vitro Condition“ Polymer-Plastics Technology and Engineering (SCOPUS), Vol. 52, pg. 1007-1015, 2013.
  52. Iqbal Mokhtar, Mohd Yazid Yahya, Mohammed Rafiq Abdul Kadir & Mohd Faisal Kambali, “Effect on Mechanical Performance of UHMWPE/HDPE Blend Reinforced with Kenaf, Basalt and Hybrid Kenaf/Basalt Fiber” Polymer-Plastics Technology and Engineering (SCOPUS), Vol. 52, pg. 1140-1146, 2013.