Journal Papers

  1. M.Razak,S. Syahrullail,N.Nuraliza,Y. Azli,N.Sapawe, (2015) “Surface Modification of Biomaterial Embedded with Pits using Die Sinker Machine”, Scientia Iranica (IF 0.842)(Revision)
  2. M.Razak, S. Syahrullail, N. Sapawe, Y. Azli, N.Nuraliza, (2015) “A New Tribological approach on Metal Cup with Optimize Pits Model using Spark Discharge Machine Particulate Science and Technology”, (IF=0.482)
  3. DM Razak, S Syahrullail, N Sapawe, Y Azli, N Nuraliza, (2014) “A New Approach using Palm Olein, Palm Kernel Oil and Palm Fatty Acid Distillate as Alternative Biolubricants: Improving Tribology in Metal on Metal Contact”, Tribology Transactions 58 (3), 511-517 (IF=1.349)
  4. Muhammad Helmi Nadri, Yushatika Salim, Norazah Basar, Azli Yahya, Razauden Mohamed Zulkifli, “Antioxidant Activities and Tyrosinase Inhibition Effects of Phaleria Macrocarpa Extracts” Afr J Tradit Complement Altern Med. (2014) 11(3):107-111 (IF=0.56)
  5. Nazriah Mahmud, Azli Yahya, Trias Andromeda, “Electrical Discharge Machining Flyback Converter using UC3842 Current Mode PWM Controller”, International Journal of Power Electronics and Drive Systems (IJPEDS) (2014) (SCOPUS)
  6. Ade Erawan Bin Minhat, Nor Hisham Bin Hj Khamis, Azli Bin Yahya, Trias Andromeda, Kartiko Nugroho, “Model of Pulsed Electrical Discharge Machining (EDM) using RL Circuit”, International Journal of Power Electronics and Drive Systems (IJPEDS) (2014) DOI: 10.11591/ijpeds.v5i2.6681 (SCOPUS)
  7. Yussuff Abayomi, Nor Hisham Bin Haji Khamis, Azli Yahya, “Performance Evaluation of Rain Attenuation Models in a Tropical Station”, International Journal of Electrical and Computer Engineering (IJECE) Vol. 4, No. 5, October 2014, pp. 782~789 ISSN: 2088-8708
  8. Lim Mim Mim, Naznin Sultana, Azli Yahya, “Fabrication and Characterization of Polycaprolactone (PCL)/Gelatin Electronspun Fibers”, Applied Mechanics and Materials, (2014) (SCOPUS)
  9. Andromeda Trias, Yahya Azli, Khamis Nor Hisham, “Gap Response of Linear and Non-Linear Discharge Model in Electrical Discharge Machining System”, Applied Mechanics and Materials, (2014) pp. 554, 648-65 (SCOPUS)
  10. Syahrullail, S., Razak, M. D., Sapawe, N., Azli, Y., & Kartiko, N., “Effect of Low Current for Machining Pit Using Electrical Discharge Machine”, In Applied Mechanics and Materials, (2014), (Vol. 554, pp. 180-184) (SCOPUS)
  11. Nugroho Kartiko,Yahya Azli, Safura Hashim Nor Liyana, Samion Syahrullai, M. Daud Razak, “Development of Computer-Aided EDM for Machining Micropits on Spherical Surface of Hip Implant”, Applied Mechanics and Materials, (2014), 554, pp, 541-545 (SCOPUS)
  12. E. Minhat, A. Yahya, N.H. Khamis, S. Samion, Z.A. Bakar, and T. Andromeda, “Power Generator of Electrical Discharge Machining (EDM) System, Applied Mechanics and Materials”, (2014), 554, pp. 638-642 (SCOPUS)
  13. E. Minhat, N.H. Khamis, A. Yahya, T. Andromeda, K. Nugroho, N.L.S. Hashim, N. Mahmud, and M. Razak, “Control Strategy for Electrical Discharge Machining (EDM) Pulse Power Generator”, Applied Mechanics and Materials, (2014), 554, pp. 643-647 (SCOPUS)
  14. E. Minhat, A. Yahya, N.H. Khamis, A.S. Samosir, M.A.A. Rahim, T. Andromeda, and K. Nugroho, “Model of Pulse Power Generator in Electrical Discharge Machining (EDM) System”, Applied Mechanics and Materials, (2014), 554, pp. 613-617 (SCOPUS)
  15. Kartiko Nugroho, Azli Yahya, Nor Liyana Safura Hashim, Md Razak Daud, Nor Hisham Haji Khamis, Kamal Khalil, Muhammad Arif Abdul Rahim, Ameruddin Baharom(2014), Investigation of Workpiece Positioning Methods for Machining Oil-Pocket on Hip-Implant Spherical Surface, Key Engineering Materials Vols. 594-595 (2014) pp 535-539 (SCOPUS)
  16. Trias Andromeda, Azli Yahya, Syahrullail Samion, Ameruddin Baharom, Nor Liyana Hashim, “Differential evolution for optimization of PID gain in electrical discharge machining control system”, Transactions of the Canadian Society for Mechanical Engineering, (2013), Vol. 37, Issue 3, pp 293-301 (IF=0.460)
  17. Nazriah Mahmood, Trias  Andromeda, Azli Yahya, Nor Hisham Khamis, Syahrullail Samion and Ameruddin  Baharom (2013), “Architecture and Training Algorithm of Feed Forward Artificial Neural Network to Predict Material Removal Rate to Predict Material Removal Rate of Electrical Discharge Machining Process”, Scientia Iranica – International of Science and Technology – Transaction on Mechanical Engineering, (IF 0.842)
  18. Nor Liyana Safura Hashim, Azli Yahya, Mohammed Rafiq Abdul Kadir, Nazriah Mahmud, Syahrullail Samion, Ameruddin Baharom, Nor Hisham Haji Khamis (2013) “A Review On Electrical Discharge Machining Servomechanism System”, Scientia Iranica – International of Science and Technology – Transaction on Mechanical Engineering (IF 0.842)
  19. Azli Yahya, Mohammed Rafiq, Razaudeen Zulkifli, Muhammad Arif, Trias Andromeda, Ameruddin Baharom, (2012) Development of Gel Electrophoresis Unit to Reduce DNA Separation Process Time – A Proof of Concept, Journal of Bionanoscience, Vol.7, 1-5, doi:10.1166/jbns.2013.1117 (SCOPUS)
  20. Nazriah Mahmud, Azli Yahya, Mohammed Rafiq Abdul Kadir (2012), Analysis And Simulation Of A Flyback Converter For Micro Machining Biomedical Component, Jurnal Teknologi. (SCOPUS)
  21. Nazriah Mahmud, Azli Yahya, Mohammed Rafiq Abdul Kadir, Syahrullail Samion, Nor Liyana Safura Hashim (2012), “Pulse Power Generator Design for Machining Micro-pits on Artificial Hip Implant”, Jurnal Teknologi Special Edition. (SCOPUS)
  22. Nor Liyana Safura Hashim, Azli Yahya, Mohammed Rafiq Abdul Kadir, Syahrullail Samion, Nazriah Mahmud (2012), “Simulation Of Micro-EDM Servomotor For Machining Micro Pits On Hip Implant”, Jurnal Teknologi Special Edition. (SCOPUS)
  23. Nazriah Mahmud, Azli Yahya, Mohammed Rafiq Abdul Kadir, Trias Andromeda, Nor Liyana Safura Hashim, (2012) Modeling of Flyback Converter for Micro Machining Biomedical Component, “Journal of Applied Mechanics and Materials SCOPUS
  24. Nor Liyana Safura Hashim, Azli Yahya, Trias Andromeda, Mohammed Rafiq Abdul Kadir, Nazriah Mahmud, Syahrullail Samion (2012) Simulation of PSO-PI Controller for Micro-EDM System in Biomedical Application, Procedia Engineering – Elsevier, vol.41. pp 805-811 IEEE Xplore and SCOPUS
  25. Tiong Chiong Ing, Azli Yahya, Mohammed Rafiq Abdul Kadir & Syahrullail Samion, “Tribological Behaviour of Refined Bleached and Deodorized Palm Olein in Different Loads Using a Four-ball Tribotester” Journal of Zhejiang University – Science A (IF= 882), 2012, DOI:10.1016/j.scient.2012.10.027
  26. Tiong Chiong Ing, Yahya Azli, Abdul Kadir Mohammed Rafiq, Samion Syahrullail (2012) Tribological evaluation of refined, bleached and deodorized (RBD) palm stearin using fourball tribotester with different normal load, Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) (ISSN: 1673-565X (Print); ISSN 1862-1775 (Online)) (IF=0.882)
  27. Tiong Chiong Ing, A. K. Mohammed Rafiq, Azli and S. Syahrullail (2012) The effect of temperature on the tribological behavior of RBD palm stearin, Tribology Transaction (ISSN: 1040-2004 (Print), 1547-397X (Online)) (IF= 1.349)
  28. Yahya A, Andromeda T, Minhat A E, Khamis N H, Khalil K and Rahim M A A (2012) Comparison Studies of Electrical Discharge Machining (EDM) Process Model for Low Gap Current, Advanced Materials Research Journal (ISSN: 1022-6680) (SCOPUS)
  29. Andromeda T, Yahya A, Baharom A, Rahim M A A, Mahmud N (2011) Material Removal Rate Prediction of Electrical Discharge Machining Process Using Artificial Neural Network, Journal of Mechanics Engineering and Automation (JMEA) (EBSCO)
  30. Azli Yahya, Ade Erawan Minhat, Trias Andromeda Abd Rachim, Nor Hisham Hj Khamis, Kamal Khalil & Muhammad Arif “Communication Within Hardware Of Electrical Discharge Machining (EDM) System”. Jurnal Teknologi Special Edition, No.55, Mei 2011, pp. 201-211. (SCOPUS)
  31. Yahya, A. and Manning, C.D. (2004) Determination of material removal rate of an electro-discharge machine using dimensional analysis. J. Phys. D: Appl. Phys. 37 1467-1471 (IF=2.721)